If this module is activated, it transmits all received DTMF characters again.
With the exception of the # symbol, all DTMF characters or commands are ignored by the SvxLink core system.
The #-symbol deactivates the DtmfRelay module
This module is usually used with a SvxLink relay to remote control other services.
The DTMF mute should be activated so that the DTMF tones are not transmitted via the relay.
Activation in /etc/svxlink/svxlink.conf by adding the entry
Example configuration in /etc/svxlink/svxlink.d/
DescriptionName of the module
Identification number for this module. This identification number may only be assigned once in the entire system.
time in seconds, after which the module is automatically deactivated.
Pause time in milliseconds, after which the received information is transmitted again.